Thursday, November 17, 2011

The Basic Features of Video Baluns


A video balun is used to wire security cameras because installers have the opportunity to have a more structured and cost effective cabling technique. With video baluns, UTP wires like Cat5 wires can be used in longer distances as compared to coax cables. Video baluns not only offer a wider range of distance but they also cost less than coax cables. An active video balun, for example, enables UTP wires to run distances of over 3,000 feet.
There are many features that a video balun offer, one of which is that it does not need power to operate. This is one reason why a video balun is cost-effective since no electricity is needed for it to function. Noise is filtered and impedance coupled devices are also built-in with video baluns. Installers and even the most technologically-inept individual no longer have to waste time crimping RJ-45 connectors because BNC coax is now used to screw terminals.
 Aside from all these features, video baluns are compatible with coax systems and can provide power and video over a single twisted pair. When it comes to the cost of video baluns, they are definitely much cheaper than Cat5 cables. CCTV video balun is one application where baluns are more practical as compared to using RG59 coax cable. This is because of the ability of video balun to transfer signal with less distortion for up to 3,000 feet and without costing too much. 
Video baluns are now available to match the different formats of video signals, the most common of which is composite video. Video baluns, when paired with Cat5 cables, can extend signals not only for homes and classrooms but for institutional and commercial settings as well. 

PIMFG.com offers a wide selection of video baluns – whether it is active video baluns or passive video baluns you need, PI Manufacturing, Corp. is sure to have them in stock.

Wednesday, August 10, 2011

Notes On Using A 4-Channel Passive Video Balun

First things first, what is a 4-channel passive video balun?

A 4-channel passive video balun is a specialized electrical transformer that converts differential electrical signals to unbalanced (also known as single-ended) electrical signals. A 4-channel passive video balun is used when dealing with radio frequencies. For example, when the length of the cable is too long, when it is unshielded or when it is mismatched in impedance, then there is a possibility of loss signal; this is where the 4-channel passive video balun comes in.

The majority of digital video security and surveillance cameras still use coaxial cable specifically the RG-59. The RG-59 is a shielded cable that has an impedance of 75 ohms and that has aluminum, mesh wires or even plastic sheath. These features prevent the loss of desired radio frequency in and prevent external noise from reaching the cable. Now, let’s talk about CAT5 or Ethernet cables. Ethernet cable has a twisted pair of wires that cancels out electromagnetic interference from external sources. It is also called UTP or short for Unshielded Twisted Pair cable because it contains no shield that prevents outside noise for radio frequency applications. Ethernet cables can also be used for video transmission lines for digital video security cameras, but it has an impedance of about 100 ohms. Since the camera is transmitting its video data at an impedance of 75 ohms and the DVR has to receive it at 75 ohms, then there is a clear mismatch between the Ethernet cable and everything else.

This is where a 4-channel passive video balun comes in. The video balun will correct the mismatch of ohms going to and from the cable; in addition, the balun may also correct for noise, white balance, and other video signal attributes. It also enables four different signals to be sent over one CAT5 cable that is up to 1200 feet in length. When using a 4-channel passive video balun, make sure to purchase two units. The first one converts the signal from BNC to CAT5 while the second video balun converts the CAT5 back to BNC so it can be used by the DVR.

Tuesday, August 9, 2011

Differentiating Passive from Active Video Baluns

Before we go discussing how to distinguish a passive from an active video balun, let’s have a refresher on what a video balun is. A video balun works by converting a balanced line to an unbalanced line and vice versa. The word “balun” is derived from two words = BAL (balance) + UN (unbalance). What makes a balanced line different from an unbalanced line is that it has two conductors and equal currents that run in opposite directions while an unbalanced line only has a single conductor and current that returns through a common ground.

A video balun functions in pairs, as one of the pairs is responsible for converting a balanced line to an unbalanced line while the other half converts the signal back. Through video baluns, signals transmitted are stronger and interference is minimal, making it extremely useful for surveillance purposes.

Passive video baluns offer less interference and degradation is minimal, making radio frequency signals transmitted stronger than others. These types of video baluns are used for their capacity to boost signal strength, making transition from one system to another seamless and noise-free. Some of the most common cables we use are Cat5E and RG59 coaxial cables.

RG59 coaxial cables are passive video baluns and are ideal for the digital video security industry. The only disadvantage to using RG59 coaxial cables is that they only have a working distance of 600 feet, whereas Cat5E cables’, another type of coaxial cables for passive video balun that is generally less expensive than RG59 cables, signals can be carried up to 1,000 to 2,000 feet. Installation of Cat5E cables is also easier. A single cable of Cat5E is equivalent to 4 RG59 cables for 4 security cameras alone.

Active video baluns, on the other hand, is different from passive video baluns because they operate through electricity. Power is needed to use active video baluns, which most use 12VDC. Active video baluns can boost signals up to 4,000-5000 feet.

Friday, August 5, 2011

How To Wind a Video Balun

Winding a video balun is not as hard as it sounds. You can, in fact, use household tools to do so. In this article, we will share with you tips on how to wind a video balun. For this task, you will need a ruler, a wire stripper, the antenna cable to which you want to wind it, some electrical tape and of course, the video balun. You can purchase a video balun from your nearby electronics shop or hardware store. You can also get it from a video balun manufacturer like PIMFG.com.

First, using the wire stripper, strip half an inch of insulation off the ends of the two wires attached to the balun. Now, slit four inches in on the outer insulation at the end of the antenna’s cable. Pull the insulation back to expose the inside of the cable.

Next, push the wire mesh back until it goes back to the uncut insulation of the cable. Carefully twist the mesh between your fingers until you are able to form a rod. Again, using the wire stripper, strip half an inch off the end of the inner wire of the insulation. Now, wind one of the two exposed ends of the wires from the video balun around the rod mesh you created. Wrap a strip of electrical tape around the two wires. Finally, wrap strips of electrical tape along the length of the cable from where the insulation ends up to the back of the video balun.

For more tips on using a video balun, keep reading this blog.


Article Source

Tuesday, August 2, 2011

Fiber Optic Cables: The Different Types and How They Are Used

The technology that fiber optic cables bring used to be only a dream. Fiber optic cables can transmit data by means of light pulses instead of electricity currents. This technology has become extremely especially useful in the telecommunications industry because they have revolutionized how telephones and even the Internet work. Nowadays, even businesses and organizations utilize fiber optic cables for their ability to send data faster in a more cost-effective manner.

What are the different types of fiber optic cables being used today and what differentiates them from one another? We may have previously shared more information about this but consider this a refresher to give you a better understanding of the different fiber optic cables available in the industry today.

1. Single-Mode Fiber Optic Cable – Because single-mode fiber optic cables can only transfer data in a single stream, these fiber connections are often used for longer cable runs. The single stream of data actually allows for faster data transmission as the single light pulse is capable of carrying a significant amount of bandwidth. In Internet usage, single-mode fiber optic cables are used for Ethernet connections that require data transmission over long distances.

2. Multi-Mode Fiber Optic Cable – Contrary to the single-mode fiber optic cables, multi-mode optical cables are capable of data transmission through several different paths. The pulses of light emitted transmit data allowing faster travel over a single fiber optic line. The downside, however, is that although more data can be transmitted, multi-mode fiber optic cables have less bandwidth available. Because of this, they are often used for shorter distances of data transmission such as a Local Area Connection (LAN).

3. Plastic Fiber Optic Cables – Made of plastic rather than glass, plastic fiber optic cables are not really used to transmit data as they are less reliable than single-mode and multi-mode fiber optic cables that are made of glass. Plastic fiber optic cables are, instead, used for impressive light displays and other ornamental purposes. These are continuously being tested upon by technology specialists for their ease of installation and usage but so far, the results are inconclusive as to whether they can be a potential alternative to commonly used fiber optic cable connections.

Wednesday, June 15, 2011

Why Choose Fiber Optic Cables

Fiber optic cables are quickly becoming the standard in the communication and electrical industry. A fiber optic cable has glass tubes or plastic fibers that can transmit digital data at a higher and faster rate when compared to other forms of both wired and wireless communication systems. While the science of engineering is way beyond the scope of this article, it is certainly easy to assess why many industries prefer the use of fiber optic cables than standard electrical cables.

While fiber optic cables are not exactly cheap, they are certainly cheaper than copper wire, which is a more economical and practical choice, especially for companies and industries that require data transmission over large distances. As fiber optic cables require certified technicians for installations, it is actually the cost of the installers that make using fiber optic cables a bit more expensive. The advantages, however, outweigh the cost in the long run.

Fiber optic cables
provide a safer and more secure connection because they are resistant to external environs. These types of cables are not easily affected by electromagnetic noise such as radios, motors, and other cables in surrounding areas. They are also highly resistant to jamming and tapping – one of the reasons why the United States Department of Defense prefers fiber optics for the last 25 years or so.

Because fiber optic cables do not require electricity to operate, they are actually safer to use because they do not pose a fire hazard. Additionally, since optical cables are resistant to environment noise, they are also resistant to electrical interference, making them extremely valuable in locations that use high voltage for security and protection.

Aside from security and fast data transmission, fiber optic cables also experience very little data loss. The light that travels through the fiber seldom experiences attenuation even over long distances. The capacity of fiber optic cables is about 26,000 times greater than twisted media – proving to be more reliable in the communication industry.

With fiber optic cables, data transmission and management becomes hassle-free while also providing security and safety in the workplace.

Thursday, June 2, 2011

Different Tools to Manage Fiber Optical Cables

Fiber optical cables are cables that contain optical fibers which are individually coated with plastic layers and contained in an eco-friendly tube for protection. Fiber optical cables are used in numerous industries for different purposes. For example, the medical industry uses fiber optical cables as light and imaging tools as well as lasers which are extremely useful during surgeries. Additionally, the industrial and commercial industry also uses fiber optical cables for imaging, especially in hard-to-reach areas. Therefore, managing fiber optical cables is very important in protecting these cables from damage and allowing ease of use. There are different products to manage fiber optical cables, often available for indoor and outdoor uses. Here are some of them:

Fiber patch panels – Used indoors, fiber patch panels can either be racked or wall mounted. Fiber optical cables are safe inside the box and are fixed in place for proper cable management. Fiber patch panels are available in 12, 24, and 48-port varieties.
Fiber splice closures – Often for outdoor use, fiber splice closures protect fiber optical cables by organizing the fiber connections using the optic trays. With the fiber tray and fiber splice closure, both the fibers and cables are protected. While waterproof splice closures are available, these types of fiber optical cable management products are commonly sold in dome and horizontal types.

Fiber optic boxes – These are shaped like boxes and protect and distribute the optical fiber links. Fiber optic boxes are similar to patch panels except they are smaller in size and are often called terminal boxes. They are also available in 12 and 24-port varieties.
Optical distribution frames – Also used to manage fiber optical cables, ODFs are often used indoors and come in both big and small sizes. While other fiber optical cable management products come in 12, 24, and 48-port varieties, ODFs allow for bigger ports as they are also sold in 72- and 98-port types.

As with any other type of cable, fiber optical cables need proper care, storage, and management to prolong their shelter lives. With the hundreds or even thousands of fiber optical cables linking different networks and equipment, it is important to protect these for future use.