Showing posts with label video balun tips. Show all posts
Showing posts with label video balun tips. Show all posts

Tuesday, January 24, 2012

Install CCTV Systems Successfully with These Tips (PART II)

Earlier, we taught you how successfully install CCTV systems by sharing a few tips. Of course, installing CCTV systems mean that you have to purchase the necessary parts such as security cameras and video baluns for the system to even function properly. With good planning, CCTV system installation should prevent future problems though troubleshooting is inevitable with years-old security systems.

While the first part of our series discussed the importance of doing proper research, canvassing the area, and checking for nearby power sources, we now conclude by detailing why security lighting, camera considerations, and choosing between cabled or wireless camera is a crucial part in successfully installing CCTV systems.

The reason why you want to install a CCTV system is to make sure you are always safe and that no intruders will come into your home, especially during at night. Having enough security lighting is important if you want the system to be turned on at night. This means that you either have to make extra lighting available or choose a security camera with low lux ratings or Infrared capability.

As CCTV systems are traditionally installed outdoors, they have to be enclosed in a weather-proof protective casing to safeguard them from external elements that could potentially damage the system. Additionally, it is necessary to choose the right security camera for the type of climate in your region because there are certain security cameras that cannot withstand extreme temperature changes.

Finally, cables are necessary parts of any CCTV installation system. Some CCTV installers find it time-consuming to run cables from the camera to the control point. Wireless systems now eliminate the necessity of extensive cabling; however, the camera has to be within range and minimum obstacles should block the signal between the camera and receiver. Video baluns make long distances possible without loss of signal and transmission.

Wednesday, August 10, 2011

Notes On Using A 4-Channel Passive Video Balun

First things first, what is a 4-channel passive video balun?

A 4-channel passive video balun is a specialized electrical transformer that converts differential electrical signals to unbalanced (also known as single-ended) electrical signals. A 4-channel passive video balun is used when dealing with radio frequencies. For example, when the length of the cable is too long, when it is unshielded or when it is mismatched in impedance, then there is a possibility of loss signal; this is where the 4-channel passive video balun comes in.

The majority of digital video security and surveillance cameras still use coaxial cable specifically the RG-59. The RG-59 is a shielded cable that has an impedance of 75 ohms and that has aluminum, mesh wires or even plastic sheath. These features prevent the loss of desired radio frequency in and prevent external noise from reaching the cable. Now, let’s talk about CAT5 or Ethernet cables. Ethernet cable has a twisted pair of wires that cancels out electromagnetic interference from external sources. It is also called UTP or short for Unshielded Twisted Pair cable because it contains no shield that prevents outside noise for radio frequency applications. Ethernet cables can also be used for video transmission lines for digital video security cameras, but it has an impedance of about 100 ohms. Since the camera is transmitting its video data at an impedance of 75 ohms and the DVR has to receive it at 75 ohms, then there is a clear mismatch between the Ethernet cable and everything else.

This is where a 4-channel passive video balun comes in. The video balun will correct the mismatch of ohms going to and from the cable; in addition, the balun may also correct for noise, white balance, and other video signal attributes. It also enables four different signals to be sent over one CAT5 cable that is up to 1200 feet in length. When using a 4-channel passive video balun, make sure to purchase two units. The first one converts the signal from BNC to CAT5 while the second video balun converts the CAT5 back to BNC so it can be used by the DVR.

Friday, August 5, 2011

How To Wind a Video Balun

Winding a video balun is not as hard as it sounds. You can, in fact, use household tools to do so. In this article, we will share with you tips on how to wind a video balun. For this task, you will need a ruler, a wire stripper, the antenna cable to which you want to wind it, some electrical tape and of course, the video balun. You can purchase a video balun from your nearby electronics shop or hardware store. You can also get it from a video balun manufacturer like PIMFG.com.

First, using the wire stripper, strip half an inch of insulation off the ends of the two wires attached to the balun. Now, slit four inches in on the outer insulation at the end of the antenna’s cable. Pull the insulation back to expose the inside of the cable.

Next, push the wire mesh back until it goes back to the uncut insulation of the cable. Carefully twist the mesh between your fingers until you are able to form a rod. Again, using the wire stripper, strip half an inch off the end of the inner wire of the insulation. Now, wind one of the two exposed ends of the wires from the video balun around the rod mesh you created. Wrap a strip of electrical tape around the two wires. Finally, wrap strips of electrical tape along the length of the cable from where the insulation ends up to the back of the video balun.

For more tips on using a video balun, keep reading this blog.


Article Source